Lower box, lid with filter, 3" elbow and flex duct.
Engine swaps bring reliable modern power to the MK1, but the finishing details are often the hardest part. Don't let a generic pod filter soak up hot engine-bay air and cost you power.
This air box is designed for MK1s running an AEG intake manifold, on a full MK4 2.0 swap or an ABA block. It gives you a true cold-air setup that looks OEM+, using the original MK1 CIS air box mounting points and the factory under-radiator cold-air inlet.
Why it works
True cold-air routing
An upgraded 3" elbow and flex duct draw fresh air from the factory lower inlet.
Drop-in mounting
Bolts directly to the factory MK1 CIS air box locations. No drilling or cutting.
Correct MAF sizing
The lid outlet points straight at the passenger-side AEG throttle body and has the exact internal diameter the ECU expects.
A/C compatible
Designed with clearance for factory air-conditioning lines.
Made for engine-bay heat
High-temperature ASA resists under-hood heat without warping.
What’s included
- Custom lower box and upper lid with M6 studs
- 3" lower cold-air elbow and connecting flex duct
- New high-flow air filter
Not included
- MAF sensor: your factory ABA or MK4 MAF slides in and bolts to the new lid
Specifications
- Manifold
- AEG (MK4 2.0)
- Mount
- Factory MK1 CIS air box points
- Air source
- Factory under-radiator inlet
- MAF
- Factory ABA or MK4 (not included)
- Material
- High-temperature ASA
What the data says
Designed around the same cold-air principle proven on the CIS Big Bore kit: every 10 °F rise in intake air temperature costs roughly 1 hp. It draws from the same factory under-radiator inlet that, in on-road temperature logging, kept air inside the CIS box at 70.7 °F while the engine bay beside it reached 108.8 °F. Dyno data for AEG-swapped cars will be published here.
Read the full study: 3" CIS Big Bore Cold Air BoxOther kits

CIS Big Bore Kit
Replaces the restrictive 2.25" factory lower air box with a 3D-printed 3" big-bore box and a matching cold-air elbow that draws from under the radiator.

ABA Swap Air Box
Replaces the usual pod filter in ABA swaps with a sealed box that draws cold air from the fender well and feeds the MAF through a correctly sized bell-mouth entry.
Ready to order the AEG Swap Air Box?
Tell us about your car and we'll confirm fitment before invoicing.
