Installed: the original upper CIS assembly bolts straight on.
The factory 8-valve CIS lower air box feeds the whole engine through a 2.25" inlet, a known choke point. This kit takes the entire cold-air path to a full 3" diameter without touching the delicate CIS fuel distributor or air-flow meter.
It also does away with the factory spring clips. The upper and lower halves are held together with M6 studs and custom hold-down brackets: secure, easy to service and no fighting with clips.
Inlet diameter comparison
- Scientific Rabbit Big Bore
- Audi aluminium air box
- Factory 16-valve box
- Factory 8-valve box
Why it works
More airflow
Upgrades the factory 2.25" inlet to a full 3" diameter so the engine can breathe more easily.
True cold-air routing
A 3D-printed 3" lower elbow mounts in the stock location under the radiator and pulls in cool outside air.
No CIS modifications
Fits the factory location. Your original upper CIS assembly and air filter bolt right on.
No more spring clips
Replaces the factory retaining clips with M6 studs and hold-down brackets.
Made for engine-bay heat
High-temperature ASA construction resists warping and UV degradation under the hood.
What’s included
- 3D-printed big bore lower air box
- 3D-printed 3" front cold-air elbow
- 3" connecting intake hose
- M6 mounting studs and hold-down brackets
Not included
- Air filter (reuse your factory CIS filter)
Specifications
- Inlet diameter
- 3.00" (factory 2.25")
- Material
- High-temperature ASA
- Fastening
- M6 studs + hold-down brackets
- Air source
- Factory under-radiator cold-air inlet
- Install
- Bolt-in, factory location
What the data says
Dyno-tested on a 1983 GTI with a ported head and manifold: power was never lost, and power and torque rose by about 2 hp at 2,200, 4,000 and 4,800 rpm, while all intake air comes from outside the engine bay. On a 5-mile road test with temperature sensors, the air inside the box peaked at 70.7 °F while the engine bay right beside it reached 108.8 °F.
Other kits

ABA Swap Air Box
Replaces the usual pod filter in ABA swaps with a sealed box that draws cold air from the fender well and feeds the MAF through a correctly sized bell-mouth entry.

AEG Swap Air Box
Uses the original MK1 CIS air box mounts and the factory under-radiator cold-air inlet, with the lid outlet aimed straight at the passenger-side AEG throttle body.
Ready to order the CIS Big Bore Kit?
Tell us about your car and we'll confirm fitment before invoicing.
